Commercial Insurance General Liability 7 min read

Faulty Repair Claims: Why Your Garage Policy May Not Pay to Redo the Work

By Bryant Arthur·Grandbay Financial Services

Published: October 5, 2026 | Last Updated: October 5, 2026

When a repair fails, the shop usually eats the comeback. Here is how the your work exclusion operates, when a faulty repair becomes a covered liability claim, and what coverage actually helps.

What does a garage policy cover?

A garage policy is a packaged product for automotive businesses that typically combines garage liability for premises and operations, garagekeepers coverage for customer vehicles in your care, auto liability for vehicles you own and drive, and property coverage on your building, equipment, and parts. Garage liability covers bodily injury and property damage to third parties arising from your operations. That grant is broad and useful. If a technician backs a customer's car into another customer's car, if a hoist drops a vehicle, if a customer slips in the service area, if a road test ends in a collision, the policy is designed for those events. Garagekeepers specifically addresses damage to vehicles left with you, which general liability would otherwise exclude as property in your care, custody, and control, and it is written on either a legal liability basis, meaning you must be legally responsible, or a direct primary basis, meaning it pays regardless of fault. Direct primary is better for customer relations and usually worth the difference in premium.

  • Garage liability: injury and property damage from premises and operations
  • Garagekeepers: damage to customer vehicles in your care
  • Auto liability: vehicles you own, including loaners and shop trucks
  • Property: building, equipment, tools, and parts inventory
  • Often added: pollution for waste oil, employment practices, cyber

What is the your work exclusion?

The your work exclusion removes coverage for property damage to your own work arising out of that work, which in practice means the policy will not pay to redo the repair you performed. It exists because insurance is not a performance warranty, and covering defective workmanship would effectively make the carrier the guarantor of your business quality. The exclusion has an important boundary. It applies to damage to your work, not to damage your work causes to other property. If you install a water pump incorrectly and the water pump fails, the pump and your labor are your work and are excluded. If that failure causes the engine to overheat and destroys the engine, the engine is other property damaged by your work, and a liability claim for the engine may well be covered. The analysis is the same in collision repair, where a defective weld you performed is your work, while the panel damage the subsequent failure caused to the rest of the vehicle is other property. This distinction is the single most useful thing a shop owner can understand about garage liability. It explains why the carrier will sometimes write a large check and sometimes decline a small one, and it is not arbitrary.

When does a faulty repair become a covered claim?

It becomes covered when the faulty repair causes bodily injury or damage to property other than the work you performed, and the most severe examples are the reason this coverage matters. A brake repair that fails and results in a collision produces bodily injury claims against the shop that are squarely within garage liability, and those claims can be severe. Several patterns recur. Suspension or steering work that fails at speed. Brake service that leaves a vehicle unable to stop. Wheel or lug nut torque errors producing a wheel separation. Fuel system work followed by a vehicle fire, which can also damage a building or other vehicles. Tire mounting errors leading to a blowout. Engine or transmission service that results in a loss of power at a dangerous moment. In each case the shop's work is excluded and the consequential damage and injury are covered, which is exactly backwards from the owner's intuition but entirely consistent with the policy's purpose. Two practical consequences follow. First, limits matter, because a brake-related injury claim is not a $25,000 claim; it is potentially a seven-figure claim, and a $1 million garage liability limit with an umbrella is the realistic structure for any shop doing safety-related work. Second, documentation matters, because your defense in every one of these cases is the repair order, the torque specification record, the parts invoice, the technician's notes, and the quality control check.

  • Covered: injury and damage to other property caused by the failed repair
  • Excluded: the cost to redo your own repair and the parts you installed
  • Safety systems (brakes, steering, suspension, wheels, fuel) carry the highest severity
  • Your defense is the repair order, torque records, parts invoices, and QC documentation

What coverage helps with the comeback itself?

Faulty workmanship is managed through warranty programs, operational controls, and pricing, not through liability insurance, and shops that treat comebacks as a cost of doing business rather than an insurance question run better. There are a few insurance-adjacent options worth knowing. Some markets offer a faulty workmanship or rework endorsement, usually with a modest sublimit and a meaningful deductible, intended for the damage-to-your-work scenario. Availability varies and the economics only work for shops with a clean loss history. A more common approach is a third-party repair warranty program, where a warranty administrator underwrites the labor and parts guarantee on qualifying repairs for a fee, which both protects the shop and becomes a selling point to customers. Parts warranties from suppliers also carry part of the load, and a shop should know the terms, specifically whether labor is reimbursed and at what rate, since labor is usually the larger cost on a comeback. Then address the operational side. Track comeback rate as a metric by technician and by repair type. Require torque verification and a documented quality control inspection on safety-related work before the vehicle leaves. Use parts from suppliers who warrant labor. And price your work for a realistic comeback rate rather than pretending it is zero. Most shops that measure comebacks find a small number of repair types and sometimes a single technician account for most of them, which is a management fix that no insurance product can substitute for.

What else should an auto repair program include?

Four additions turn a basic garage policy into a program that matches how shops actually operate today. Garagekeepers on a direct primary basis with a limit set to your maximum vehicle accumulation, including the Friday night storage of vehicles waiting on parts, because the limit should match your worst-case yard rather than an average day. Second, consider the vehicles you do not own but control: customer vehicles on test drives, loaners, vehicles moved between locations, and employees using personal vehicles for shop errands. Loaner fleets need auto liability and physical damage, and employee errands need hired and non-owned auto. Third, add employment practices liability. Shops have wage and hour exposure around flat-rate pay, unpaid diagnostic time, and apprentice classification, and those claims are common and expensive. Fourth, add cyber and consider the increasing data footprint of a modern shop: customer contact and payment information, telematics and vehicle data, and scan tool connections to vehicle networks. A shop that takes cards and stores customer records has a notification obligation after a breach whether it thinks of itself as a technology business or not. Finally, revisit limits annually against the work you now perform. A shop that added advanced driver assistance system calibration, electric vehicle service, or fleet maintenance contracts in the last two years has changed its risk profile, and the policy should reflect the shop you are today rather than the one you insured four years ago.

Frequently Asked Questions

Related Resources

This article is for general information and is not a substitute for policy language or professional advice.

If you have ever been surprised by a declined comeback claim, a fifteen-minute walk through your garage policy will make the pattern clear and show you where the real limits need to be. Book a time at calendly.com/grandbayfinancial

Get a Quote