What is contractors equipment insurance?
Contractors equipment insurance is inland marine property coverage that insures mobile equipment and tools wherever they travel, including on a jobsite, in transit, and in storage. It exists because standard commercial property policies were written for buildings and the contents inside them, and they restrict coverage once property leaves the described premises. Equipment that moves is exactly what a contractor owns most of. The coverage responds to fire, theft, vandalism, collision and overturn, windstorm, flood in many forms, and mechanical damage from a covered cause. It is written on an "all risk" basis in most markets, meaning anything not excluded is covered, which is a meaningful advantage over named-peril forms. Coverage is typically structured in three buckets. Scheduled equipment lists each unit over a dollar threshold, commonly items valued above $5,000 to $10,000, by year, make, model, serial number, and insured value. Unscheduled or blanket small tools covers everything below that threshold under a single limit, often $10,000 to $100,000 depending on the size of the operation, with a per-item sublimit of $1,000 to $5,000. Rented, leased, and borrowed equipment covers machines you do not own but are contractually responsible for, which matters because rental agreements almost always make you liable for the full replacement value plus loss of rental income.
- Scheduled equipment: each major unit listed with a specific insured value
- Blanket small tools: a pooled limit with a per-item cap for hand and power tools
- Rented and leased equipment: usually a separate limit, often $100,000 to $500,000
- Employee tools: a small sublimit, frequently $1,000 to $5,000 per employee
- Installation floater: materials you will install but have not yet attached
Why does builders risk not cover my equipment?
Builders risk covers property that becomes a permanent part of the finished project, not the means of building it. The form insures the structure, fixtures, and materials intended for incorporation into the work. Most builders risk policies include an explicit exclusion for contractors tools and equipment, sometimes with a small concession for temporary structures like scaffolding or construction trailers. The logic is simple. A builders risk policy has a defined project, a defined value, and a defined end date. Your equipment goes to the next job. This is the single most common coverage surprise we see on a construction account. A contractor loses a $140,000 telehandler to a jobsite fire, assumes the builders risk policy handles it because the loss happened at the insured project, and learns weeks later that the equipment exclusion applies. Meanwhile the project sits, the schedule slips, and liquidated damages start accruing under the prime contract.
How is equipment value set, and why does it matter?
Most contractors equipment policies pay on an actual cash value basis unless you negotiate otherwise, which means depreciation comes out of your check. A 2017 excavator you bought for $210,000 may carry an actual cash value closer to $95,000 after nine seasons. If you still owe $60,000 on it and a replacement unit now costs $240,000, the math does not work in your favor. Three valuation options are worth asking about. Actual cash value is the default and the cheapest. Replacement cost, available on newer units in many markets, pays to replace with like kind and quality without depreciation, and carriers usually limit it to equipment under five to ten years old. Stated amount or agreed value fixes the payable figure in advance, which removes argument at claim time but requires you to keep the schedule current. The practical rule is that your schedule is a living document. Equipment bought in March and reported in December is equipment that may be covered only under a newly acquired property clause, which typically gives you 30 to 90 days of automatic coverage up to a capped amount, often $100,000 to $250,000, and nothing after that.
- Review the schedule quarterly, not at renewal
- Ask whether replacement cost is available by unit age
- Confirm the newly acquired equipment window and dollar cap in writing
- Keep purchase invoices and serial numbers in one place for claim proof
What does the policy exclude?
The most expensive exclusions are mechanical breakdown, wear and tear, and employee dishonesty. Contractors equipment coverage pays when an outside cause damages the machine. It does not pay when a hydraulic pump simply fails, when an engine wears out, or when a foreman sells a plate compactor out of the back of a truck. Theft by an employee is a crime coverage question, not an equipment question, and it requires a separate crime policy or endorsement with its own limit. Other exclusions worth reading closely include equipment while being used underground or on water in some forms, loss from unexplained disappearance or inventory shortage, damage from overloading or testing beyond rated capacity, and in several markets a flood or earthquake sublimit well below the policy limit. Theft coverage may also carry a protective safeguards condition requiring locked storage, immobilizers, or GPS telematics on units above a stated value. Telematics are becoming a premium lever as well as a claim condition. Carriers increasingly offer credits of five to fifteen percent for fleet-wide GPS tracking, because recovery rates on tracked machines are dramatically higher.
How much equipment coverage does a contractor actually need?
Build the limit from a current replacement cost inventory, not from your depreciation schedule. The accounting book value of your fleet and the cost to put the same iron back to work are two different numbers, and the gap widens every year. Start with a full inventory at today's replacement cost, add a realistic figure for the rented and leased equipment you carry at peak season rather than on an average day, and then add a separate blanket limit for small tools based on what a single trailer loss would cost. Pay attention to peak accumulation. A contractor with $2.4 million of equipment spread across eleven jobs has a very different maximum loss than the same contractor whose fleet sits in one yard every weekend. Yard concentration is the figure the underwriter cares about, and it is the figure most often understated. Finally, add rental reimbursement and loss of use coverage if it is available. Replacing a machine takes weeks. Keeping the schedule takes a rented machine next Monday, at rates that commonly run $1,800 to $6,000 per month for mid-size units, and that cost is not part of the physical damage limit unless you buy it.
Frequently Asked Questions
Related Resources
This article is for general information and is not a substitute for policy language or professional advice.
