Commercial Insurance Products Liability 7 min read

Aviation Products Liability and Repair Station Coverage: Insuring the Work You Sign Off On

By Bryant Arthur·Grandbay Financial Services

Published: October 5, 2026 | Last Updated: October 5, 2026

For repair stations, parts distributors, and maintenance providers, the exposure is not the aircraft in your hangar. It is the signature on the logbook. Here is how aviation products and grounding coverage works.

What is aviation products liability?

Aviation products liability covers bodily injury and property damage arising out of a product you manufactured, sold, distributed, or repaired after it has left your control. For a repair station, the analogous coverage is completed operations, which responds to injury or damage arising out of work you performed once that work is finished and the aircraft has been returned to service. The distinction between premises coverage and products or completed operations coverage is the single most important structural point. Your airport premises liability pays if a visitor trips in your lobby. Your hangarkeepers pays if you damage a customer's aircraft while it is in your care. Neither pays if an engine mount you overhauled fails in flight eleven months later. That claim is a products and completed operations claim, it will be pursued by the aircraft owner, the passengers or their families, and often the insurers who already paid them through subrogation, and it will be litigated against your maintenance records.

  • Premises liability: injury on your property
  • Hangarkeepers: damage to aircraft in your care, custody, and control
  • Products liability: injury or damage from parts you made, sold, or distributed
  • Completed operations: injury or damage from maintenance or repair work you finished
  • Grounding liability: loss of use of an entire fleet after a defect is identified

What is grounding liability and why is it the biggest number?

Grounding liability covers loss of use of aircraft that have not been physically damaged but are withdrawn from service because a defect in your product or work was discovered, and it is the one coverage in aviation that can turn a modest parts claim into a catastrophic one. If you distribute a batch of 240 fasteners and a defect is identified, the physical damage may be trivial while the financial consequence is enormous. Operators ground aircraft, lose revenue, cancel flights, and claim those losses from you. Standard commercial general liability definitions of property damage include loss of use of tangible property that is not physically injured, but aviation forms treat grounding as a distinct insuring agreement that must be specifically granted and is frequently sublimited. For parts manufacturers, distributors, and overhaul shops, this is the coverage to confirm by name. An aviation products policy with a $5 million limit but no grounding grant is not protecting you against the loss scenario most likely to exceed your limit. Pay attention to whether grounding sits inside the products aggregate, whether it carries its own sublimit, and whether it requires that a defect be identified by an airworthiness directive or similar official action to trigger.

How long does the exposure last?

The exposure lasts far longer than the warranty on your work, which is why the coverage trigger and the policy form matter so much. Aviation components stay in service for decades, maintenance records follow an airframe for its entire life, and accident investigations reconstruct maintenance history going back many years. A logbook entry you signed in 2019 is discoverable evidence in a 2027 lawsuit. Most aviation liability is written on an occurrence basis, which means the policy in force when the injury occurred responds, regardless of when the claim is brought. That is favorable for a long-tail exposure, and it is a reason to preserve every expired policy, declarations page, and certificate permanently rather than for the usual seven years. Where a claims-made form is used, the retroactive date controls everything, and a change of carrier that resets the retroactive date can leave years of past work uninsured. There is also a federal limitation worth knowing: the General Aviation Revitalization Act establishes an eighteen-year statute of repose for claims against manufacturers of general aviation aircraft and components, running from delivery or from installation of a replacement part. It provides real protection for manufacturers, with exceptions, and it does not generally shield maintenance providers for their own negligent service work.

  • Occurrence forms respond based on when injury happened, not when the claim arrives
  • Preserve all expired aviation policies permanently; they are your coverage for past work
  • On claims-made forms, protect the retroactive date through every carrier change
  • The eighteen-year statute of repose helps manufacturers, not service providers, and has exceptions

How do contracts and customer requirements shape the coverage?

Customer contracts increasingly dictate limits, additional insured status, and waiver language, and in aviation those requirements are often non-negotiable because the customer is an airline, a government agency, or a lessor with a standardized risk management policy. Expect to be asked for a certificate evidencing aviation products and completed operations coverage with a limit between $5 million and $50 million depending on what you work on, breach of warranty coverage for lessors and lienholders, additional insured status on a primary and noncontributory basis, and a waiver of subrogation. Two details cause the most problems. First, your general liability policy almost certainly contains an aircraft exclusion, so presenting a standard commercial general liability certificate to satisfy an aviation requirement will fail review, and may fail it after you have already performed the work. Second, hold harmless and indemnity language in a maintenance services agreement can obligate you well beyond your negligence, and contractual liability coverage in aviation forms has its own conditions. Have the insurance requirements exhibit reviewed before you sign, not after a customer's risk department rejects your certificate. Routine subcontracting creates the same issue in reverse: if you send a component to an outside shop for specialty work, your customer still holds you responsible, so collect certificates from your own vendors with the same rigor your customers apply to you.

What do underwriters review on a repair station?

Aviation products underwriting is documentation driven and centers on what you work on, who signs it off, and how traceable your parts are. Expect the application to ask for a breakdown of revenue by category, because a shop doing interior refurbishment is a completely different risk than one overhauling turbine hot sections or rebuilding flight control components. Underwriters will review your FAA Part 145 certificate and ratings, your repair station manual and quality control manual, technician certification and training records, your parts traceability and receiving inspection process, whether you install any suspected unapproved parts controls, calibration records for tooling and test equipment, and your record retention practices. Rotables and life-limited parts tracking gets specific attention. They will also look closely at any work on critical components: engines, propellers, rotor systems, landing gear, and flight controls carry the highest rates because a failure in those systems is rarely survivable and almost always litigated. Finally, they will ask about your customer mix. Work performed on aircraft carrying passengers for hire, on air ambulance operations, or on aircraft operated under a foreign registry all change the pricing, and failing to disclose that mix accurately is a coverage problem waiting to happen.

Frequently Asked Questions

Related Resources

This article is for general information and is not a substitute for policy language or professional advice.

If your aviation program was built around hangarkeepers and premises liability, the larger exposure may be uninsured or sublimited. We will read the products and grounding wording and tell you where you stand. Book a time at calendly.com/grandbayfinancial

Get a Quote